EXAMPLE- 1. Areas of precipitation (can be reduced by CP) 2. Arrival/departure tabular list 3. Trackball (control) position symbol (A) 4. Airway (lines are sometimes deleted in part) 5. Radar limit line for control 6. Obstruction (video map) 7. Primary radar returns of obstacles or terrain (can be removed by MTI) 8. Satellite airports 9. Runway centerlines (marks and spaces indicate miles) 10. Primary airport with parallel runways 11. Approach gates 12. Tracked target (primary and beacon target) 13. Control position symbol 14. Untracked target select code (monitored) with Mode C readout of 6,000" 15. Untracked target without Mode C 16. Primary target 17. Beacon target only (secondary radar) (transponder) 18. Primary and beacon target 19. Leader line 20. Altitude Mode C readout is 6,000" (Note: readouts may not be displayed because of nonreceipt of beacon information, garbled beacon signals, and flight plan data which is displayed alternately with the altitude readout) 21. Ground speed readout is 240 knots (Note: readouts may not be displayed because of a loss of beacon signal, a controller alert that a pilot was squawking emergency, radio failure, etc.) 22. Aircraft ID 23. Asterisk indicates a controller entry in Mode C block. In this case 5,000" is entered and "05" would alternate with Mode C readout. 24. Indicates heavy 25. "Low ALT" flashes to indicate when an aircraft"s predicted descent places the aircraft in an unsafe proximity to terrain. (Note: this feature does not function if the aircraft is not squawking Mode C. When a helicopter or aircraft is known to be operating below the lower safe limit, the "low ALT" can be changed to "inhibit" and flashing ceases.) 26. NAVAIDs 27. Airways 4-5-6 Surveillance Systems